Join our Newsletter

Triumph Tiger 800/800XC 40 Liter Side Luggage Pannier System

Click on image above to enlarge
Integrated waterproof lid lock
Integrated elastic gear retention straps and lid lanyards with snap buttons
Hepco Becker “Lock-It” Side Luggage Racks
Caribou quick attach/release mount system with backing plates and adjustable breakaway latch
Back to List
 
$822.00
SKU:
TIGER800XC40S
Qty:
 
 
 
Additional Info
pdf Install Instructions HB racks- Triumph Tiger 800XC.pdf (391.7 KB)
pdf Install Instructions- Caribou-HB 40L Side Luggage Kit.pdf (363.2 KB)
 

THIS SYSTEM INCLUDES:
-Two SKB I-series Cases with integrated waterproof lid locks, lid lanyards, & internal elastic retention straps. Back of cases are pre-drilled for our mount system.
-Caribou quick attach/release mount system with our industry leading latch.
-Super strong, German made Hepco Becker “Lock-It” side racks in black powder coat. Easily removed when you want the clean look of your bike.
-Photo instructions & phone support Mon-Fri 9-5pm Mountain Time.
-See more product detail in our YouTube video.

 

FEATURES:
-Nearly indestructable SKB cases with a heavy duty watertight O-ring lid seal, will not crack or shatter like hard plastic, will not dent & leak like aluminum luggage. Cases feature push button activated latches and thinner wall construction for lighter weight, and they come with the original manufacturer's Lifetime Guarantee
-Cases are pre-drilled for optimum performance & safety with installed waterproof lid locks for security, lid lanyards (or optional liners) to keep the case lid from opening past 80degrees, and internal retention straps to hold your gear in place. If you prefer the cases un-drilled just ask.
-Caribou heavy duty external latch mount system holds the case tightly on the rack to eliminate all case movement. Remove/attach the cases from the bike in seconds, no need to open case to access pucks or bolts.
-The Caribou field replaceable latch is designed to release the case from the bike in a hard crash thereby protecting the bike's subframe and luggage rack. Our latch is adjustable to account for wear and to keep the system tight and secure over tens of thousands of hard miles - unlike clip locks and spring pins that rattle, loosen and fail under hard use.
-Super Strong Hepco Becker side luggage racks in black Powder Coat - our experience and testing has proven these to be the strongest and most reliable side racks available. The "Lock-It" feature allows one to remove most of the rack in a few short minutes leaving behind small unobtrusive attach plates.
-Easy to assemble Turn-key System, no drilling or modification to the bike. All mount components are made of high strength powder coated steel.
-Single key system - the key on the latch mount system latch is matched to the lid lock key.
-Passenger Friendly Design - plenty of room for passenger's legs and feet on passenger peg
-Total weight of the side case system is approx. 16kg (35lbs) including cases, hardware and all bracket components.
- 40 Liter (2,441 cu/in) Case dimensions are approximately External 55.9cm (22") x 47cm (18.5") x 21.6cm (8.5") and Internal 52.1cm (20.5") x 39.4cm (15.5") x 19.6cm (7.7")
- Narrow profile, 99cm (38-39") width across outside of cases at widest point

Customer Reviews
Overall:
Name:
Marty Rose
Date:
04/07/2013
Review:
Just received and installed my 40L Pannier
System.
Customer service - I called ahead to ask a few questions prior to ordering and whomever I spoke to was patient and helpful. Ordering online went very well and I received several e-mails confirming my order, shipping and tracking information.
Installation - the Hepco Becker rack went on quite easily. It appears rugged and I especially like that it is easily removed and the remaining brackets are barely noticeable. Assembly of the panniers themselves was also fairly easily accomplished, although I did suffer two minor difficulties. The first revolved around the locking point for the compression latch. The instructions were straight forward, but it took me a bit to actually figure out how the bag went onto the rack and locked. Once I figured out how the latch slid into the locking mechanism it all became clear. The other problem was the compression latch itself. Once I had everything installed, I could not get the knob to rotate the full 180 degrees to the locked position. Even after adjusting it as loose as I could no dice. Finally I loosened up the bolts holding all of the pannier mounting brackets in place and they compressed allowing the compression latch to rotate fully. I was then able to tighten all the other bolts up and everything works as advertised.
Overall I am very pleased with the set. They look good on the bike and will hold a ton of stuff. I ordered the case liners and am glad I did. They'll keep stuff in the pannier if you open them while on the bike, but they unsnap to allow fully opening of the lid when you have them off the machine. I'll add more to the review once I have the opportunity to put them to use on and off road. Happy riding.
Rating:
Add Review
Name:
Review:
Rating:
 
 
 
 
 
 

(Your browser will be redirected back to this page)